How To Read An IES File For A Bedside Reading Light
Use measured photometry to test a bedside reading-light design.
Read article →Resource topic
Technical Specifications
Practical guidance for evaluating hotel bedside lighting performance, installation and project documentation.
Articles
Guidance for technical specifications.
Each article addresses a distinct informational question and connects to relevant commercial pages without replacing their intent.
Photometric Files For Hotel Lighting Projects
How to request, check and use luminaire photometric files for hotel rooms.
Read article →How To Evaluate LED Chip Quality In Reading Lights
A component claim is only one part of system quality.
Read article →Hotel Reading Light Thermal Management
A room-specific thermal review for reading lights.
Read article →Integrated Driver Vs Remote Driver For Bedside Lights
A whole-system choice between driver locations.
Read article →Constant Current Vs Constant Voltage For Hotel Lights
A driver-matching guide for hotel luminaires.
Read article →Hotel Lighting Driver Selection Guide
A driver specification checklist for guestroom lighting projects.
Read article →Hotel Lighting Power Factor Explained
The electrical meaning and limits of power-factor claims.
Read article →LED Lifetime Requirements For Hotel Lighting
How to assess useful lifetime evidence for hotel lights.
Read article →Hotel Lighting Lumen Depreciation Explained
What L70 and component test reports can and cannot tell a hotel buyer.
Read article →How To Maintain Consistent CCT Across Hotel Rooms
A practical colour-consistency plan for samples, purchase orders and later repairs.
Read article →SDCM And Color Consistency In Hotel Lighting
A practical way to review color matching across rooms.
Read article →LED Color Consistency For Multi Room Hotel Projects
How to specify and inspect LED colour consistency across repeated rooms.
Read article →Warm White Lighting For Hotel Bedrooms
Warm white is a visual choice that needs a room sample.
Read article →Hotel Bedside Lighting And Blue Light At Night
Control evening exposure as a room decision, not a label.
Read article →Why Flicker Matters In Hotel Lighting
Check the driver, dimmer and lamp as one system.
Read article →Flicker Free LED Lighting For Hotel Rooms
A practical way to evaluate flicker claims for guestroom lighting.
Read article →Honeycomb Louver Vs Recessed Lens For Glare Control
Two glare-control details with different trade-offs.
Read article →Anti Glare Optics For Bedside Reading Lights
Compare optical shielding through real bedside viewing positions and page coverage.
Read article →What Makes A Reading Light Low Glare
Low glare depends on the fitted room, not a label.
Read article →How To Choose Beam Angle For Hotel Reading Lights
Select reading-light distribution from page area and both pillows.
Read article →Narrow Beam Vs Wide Beam Reading Lights
The right beam is the one that works in the installed room.
Read article →Hotel Bedside Reading Light Beam Angle Guide
What beam angle describes and how to test bedside page coverage without disturbing the other guest.
Read article →How Much Lux Is Needed For Reading In Bed
Set a project reading target and measure it at the real page.
Read article →How Many Lumens For A Bedside Reading Light
A practical way to judge bedside reading output without relying on a universal lumen number.
Read article →Why CRI 90 Matters In Hotel Guest Rooms
Use CRI with colour temperature, samples and verified model data.
Read article →Best CRI For Hotel Lighting
A practical CRI decision for hotel designers and buyers, with model-specific evidence limits.
Read article →Best Color Temperature For Bedside Reading Lights
An in-room test for warm-white bedside reading-light options.
Read article →2700K vs 3000K for Hotel Guest Room Lighting
Choose guestroom warm white from materials, layers and a real sample.
Read article →Best Color Temperature For Hotel Bedrooms
How to select hotel bedroom colour temperature using room materials, tasks and physical samples.
Read article →Start a project
Discuss a technical requirement with MYDE.
Share your drawings, finish schedule or product requirements. We will review the application before recommending a configuration.