MD-WL-Y278
Round backlit reading light
A circular wall light pairs a focused reading head with a continuous halo of ambient backlight.
View productHotel bedside lighting collection
Hotel Headboard Wall Lights
Hotel headboard wall lights are part of the full bedside wall: lighting, charging, controls, upholstery and furniture must work together. MYDE helps you compare fitting formats before fixing the headboard elevation.
01
Plan the full functional wall
Mark the bed and mattress position, headboard seams, bedside furniture and room controls. Decide whether the wall light provides reading only, reading plus ambient light, or a shade-led decorative layer.
Y278 is a compact reading-and-halo example. Y133 adds a fabric shade and USB-A/C. Y020 is a recessed reader with charging. Their different footprints make them alternatives for different elevations rather than direct dimensional substitutes.
02
Coordinate furniture and electrical interfaces
Share the panel section as well as the front elevation. Confirm support behind upholstered panels, cable access and the ability to service the fitting without unnecessary furniture removal. Do not transfer the light’s overall dimensions into a headboard cut-out.
For paired bedsides, check both guest positions and any asymmetry in the furniture. Approve the complete room arrangement before repeating it across room types. If your question is specifically the reader’s fixing into the panel, use headboard reading lights for that narrower comparison.
03
Models to compare
| Model | Configuration | Before selection |
|---|---|---|
| MD-WL-Y278 | Round surface-mounted 3 W reader and 6 W COB ambient light with independent switches. | On/off only, without dimming, USB or AC outlet. |
| MD-WL-Y133 | 3 W reader, beige linen shade, independent light switches and USB-A/C; Antique Brass finish. | Shade source and USB output allocation need confirmation. Finish does not mean solid brass. |
| MD-WL-Y020 | Recessed 3 W reader, metal pushbutton and USB-A/C (5 V 2 A shared total). | Confirm the cut-out and rear clearance. Housing dimensions are not an installation opening. |
04
Supporting specification guides
Selected formats
Products for this brief
MD-WL-Y133
Linen-shade charging wall light
A rectangular linen shade, directional reading head and two USB ports create a coordinated bedside fixture.
View product
MD-WL-Y020
Recessed reading + USB
A square recessed fitting combines a focused reading head, a round pushbutton and two USB interfaces.
View productUseful answers
Before we begin
01Is this only for recessed lights?+
No. The full headboard composition may use recessed or surface-mounted formats.
02Can an upholstered panel support a fitting?+
The panel build-up and fixing support require review; upholstery alone does not establish adequate support.
03Should both sides use identical layouts?+
Check the room and furniture arrangement. Agree any required orientation before procurement.
04What should be approved first?+
Coordinate the elevation, section, cable route and selected sample before final headboard manufacture.
Start a project
Discuss your hotel headboard wall lights brief.
Share your drawings, finish schedule or product requirements. We will review the application before recommending a configuration.